1955 1956 1957 Chevrolet front power disc brake kit conversion drilled slotted

Description: This is a new 1955-1957 Chevrolet passenger car power front disc brake conversion kit. This is a very complete kit. There are only three items not included that you will need. They are brake fluid, wheel bearing grease, vacuum hose and intake manifold fitting. We employee a full time tech support staff for any questions you might have. I do offer several other disc brake conversions for 1955-1957 Chevrolet. We welcome any and all questions. don't see what you need? Just ask we are happy to help!!!! You will need 14 inch disc type wheels or 15 inch or larger wheels. THIS WORKS ON YOUR STOCK DRUM BRAKE SPINDLES. Please notice and compare: Our Caliper brackets are cut from and milled IN THE USA from 5/8 A36 steel. No bending no stamping ect. This helps eliminate a lot of flex you see in other brackets. Kit includes. 1- 7" dual diaphragm brake booster and master cylinder with correct firewall mounting brake and clevis to mount the booster 1- proportioning valve with proper mounting hardware. The valve is for disc brakes in the front and drum brakes in the rear. 1-pre bent oem steel front brake line set. These lines go from the proportioning valve to the front calipers. 1- pair of loaded calipers. (complete with brake pads) 1- pair of drilled and slotted rotors 1- complete mounting hardware kit. This includes caliper brackets, nuts, bolts, wheel bearings, wheel seals, rubber hoses, banjo bolts, ect.

Price: 549 USD

Location: Isanti, Minnesota

End Time: 2024-08-29T16:09:26.000Z

Shipping Cost: 79 USD