American Racing Torq Thrust Wheel Caps - Custom Machined Aluminum

Description: These caps are sold in pairs, ordering "1" will get you two wheel caps. So if you'd like a set of four caps for your car, make sure the quantity says 2 in your cart.This cap is designed to fit the American Racing Torque Thrust wheels and provide clearance for the dust cap on the end of the front axles. I feel the stock wheel caps provided by American Racing are too large and stick out too far, so I designed these caps to be a low profile option, while still looking like they came from the factory.These caps are CNC machined from 1/2" thick 6061 Aluminum plate, here in the United States. The back side of the wheel cap is bored out over 3/8" to clear most dust caps. Due to the nature of machined parts, some tooling marks can be seen.While these are designed to clear the dust caps on the front of some classic vehicles, they also work well on the rear wheels, completing the look around the whole vehicle.Another great feature about these caps is they do not need to be removed in order to remove the wheel from the car. These caps are designed to allow the standard socket tools to be used to remove the wheel and not be in the way. Fantastic!!Each cap is shipped with five flat head cap screws for a flush, minimalist finish.These caps fit a number of American Racing Wheels, including model numbers:VN105, VN109, VN205, VN215, VN309, VN405, VN450, VN470, VN605, VN515, and VN815. The simplest way to determine if these caps will fit your ARTT wheels, is to measure the distance from one wheel cap threaded hole on the wheel to the next wheel cap threaded hole. These caps will fit those with a 2-1/4" distance. The bolt pattern diameter for these caps is 3.78", but it's not as easy to measure that diameter, that's why it's easier to measure the distance of the bolt holes themselves. See video about Wheel Caps on YouTube: https://youtu.be/xEugM8j7C_U

Price: 60 USD

Location: Colbert, Washington

End Time: 2024-08-24T00:30:51.000Z

Shipping Cost: 0 USD