BSR-1 Drag Slot Car Chassis Design Pack

Description: Sick of over paying for drag slot car chassis kits? Well here is your chance to be your own boss! You are purchasing the digital files used to have these chassis laser cut. I am the original designer of the ESR chassis kits starting way back in 2016, which are no longer available, and to keep the design alive and deter all the copiers I am selling the designs to everyone! #1 is the backhalf only kit, to be used with either heavy nose piece. Designed to be laser cut in .035" thick or lower material #2 is a complete chassis kit, this comes with everything you need to build a bar or no bar drag chassis, also .035" thick or lower #3 is the heaviest nose, this is suggested to be cut from at least .060" and up to .125", it will be a few grams heavier than the #4 #4 is the middle nose, this is also suggested to be cut from at least .060" and up to .125" For example, (at the time of the writing), you can purchase 10 #1's and 10 #4's to build the "Mid pan config" and your price is under $6 a chassis! Other people who have copied this design are selling for over $20!!! Within 12 hrs after payment you will receive the email with these (4) individual files. You can find your own laser cutting service or use the one I have been using, which this information will also be provided. Once again, these are digital files not physical. They are to be used to produce the chassis kits/parts you see in the photos and the lowest cost to you. -----IMPORTANT------ AFTER PURCHASING THESE FILES, SEND ME A MESSAGE WITH THE EMAIL ADDRESS YOU WOULD LIKE THESE FILES SENT TO. IT WILL CUT DOWN ON TIME TAKEN TRYING TO TRACK IT DOWN MYSELF. YOU DO NOT GET ANYTHING IN THE MAIL, THESE ARE ONLY EMAILED AND THERE IS NO OTHER WAY TO SEND THEM TO YOU.

Price: 25 USD

Location: Marietta, Georgia

End Time: 2024-05-06T01:35:28.000Z

Shipping Cost: 0 USD