EPEVER MPPT Solar Charge Controller 10A 20A 30A 40A 12V/24V Auto Max PV 100V

Description: EPEVER MPPT solar charge controller 10A 20A 30A 40A 12V/24V auto work common negative grounding solar panel regulator charger (Tracer-AN) US Local warehouse in Chicago IL. Domestic fast shipping and Tech-support services.MAIN FEATURES :●Advanced MPPT technology, with efficiency no less than 99.5%●Ultra-fast tracking speed and guaranteed tracking efficiency●Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time●Wide MPP operating voltage range●High quality components, perfecting system performance, with maximum conversion efficiency of 98%●Accurate recognition and tracking of multiple-peaks maximum power point ●International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life●Charging power and current limitation function●Compatible with lead-acid and lithium-ion batteries●Battery temperature compensation function●Real-time energy statistics function●Overheating power reduction function●Multiple load work modes●The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. ●With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various●communication requirements in different situations.●Monitor and set the parameters via mobile phone APP or PC software ●Full-load operation without any drop in capacity within the range of working environment temperature ●Extensive electronic protection DETAILS AND SPECIFICATIONS : Package Include :1 x MPPT Solar Charge Controller (10A / 20A / 30A / 40A)1 x Temp Sensor Unit (Model:RT-MF58R47K3.81A)1 x User Manual(English) Specification :(Tracer1210AN) MPPT solar charge Controller 10A · Model: Tracer1210AN· Rated charge and discharge current :10 Amp· Nominal system voltage:12V/24V DC auto work· Max. PV input power: 130W charge for 12V battery system / 260W charge for 24V battery system· Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)· Battery type : Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )· Battery voltage range : 8～32V· MPP voltage range:V(BAT+2V)～72V· Grounding : Common negative· Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Working environment temperature : -25℃～+50℃(100% input and output)· Temperature: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· Controller Terminals:#12 AWG(4mm2) ; Recommended Wire cable:#12 AWG(4mm2)· Dimension:172*139*44mm ; weight :0.6 KG(Tracer2210AN) MPPT solar charge Controller 20A · Model: Tracer2210AN· Rated charge and discharge current :20 Amp· Nominal system voltage:12V/24V DC auto work· Max. PV input power: 260W charge for 12V battery system / 520W charge for 24V battery system· Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)· Battery type : Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )· Battery voltage range : 8～32V· MPP voltage range:V(BAT+2V)～72V· Grounding : Common negative· Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Working environment temperature : -25℃～+50℃(100% input and output)· Temperature: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#10 AWG(6mm2)· Dimension:220*154*52mm ; weight :0.94 KG(Tracer3210AN) MPPT solar charge Controller 30A · Model: Tracer3210AN· Rated charge and discharge current :30 Amp· Nominal system voltage:12V/24V DC auto work· Max. PV input power: 390W charge for 12V battery system / 780W charge for 24V battery system· Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)· Battery type :Lead-acid( Sealed /GEL(AGM)/Flooded);Lithium(LiFePO4/ Li[NiCoMn]O2 ); and User-defined . (AGM battery default setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )· Battery voltage range : 8～32V· MPP voltage range:V(BAT+2V)～72V· Grounding : Common negative· Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Working environment temperature : -25℃～+50℃(100% input and output)· Temperature: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#8 AWG(10mm2)· Dimension:228*164*55mm ; weight :1.26 KG(Tracer4210AN) MPPT solar charge Controller 40A · Model: Tracer4210AN· Rated charge and discharge current :40 Amp· Nominal system voltage:12V/24V DC auto work· Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system· Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)· Battery type :Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )· Battery voltage range : 8～32V· MPP voltage range:V(BAT+2V)～72V· Grounding : Common negative· Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Working environment temperature : -25℃～+50℃(100% input and output)· Temperature: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· RS485 interface:5VDC/100mA· Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#6 AWG(16mm2)· Dimension:252*180*63mm ; weight :1.65 KG Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order >3. >2. >1.· Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.· DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .· If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.) MT 50 MT50 is a remote meter for monitoring and programming EPever solar charge controller. Compatible with: Tracer-AN/Tracer-BN/Tracer-BP, Triron-N, XTRA-N, LS-B, LS-BP, VS-BN, eTracer, iTracer Features :1.Energy statistics display function.2.Longer communication distance based on RS485.3.Load modes:manual control, light on/off, light on/timer, timer.4.Real-time alarm of failure information of the connection devices5.Easy and convenient to operate with 6 butons, and programmable parameters.6.A large LCD screen can dynamically display the tool's operating data and working conditions.7.It can automatically identify & display the type, model, and relevant parameter of the controller.8.Battery type selection: Gel, sealed, flooded and User(programable) .9.Programmable parameters. Specifications : Self-consumption : Backlight and acoustic alarm on<65mA,Backlight on<23mA,Backlight off <15mAFaceplate dimensions : 98×98 mm / 3.86×3.86 inFrame dimensions : 114×114 mm / 4.49×4.49 inConnector type : RJ45Meter cable : Standard 2m, max .50mMeter weight : 0.190 Kg Ambient Temperature : -20℃~+70℃/-4℉~158℉**************************************************************************************************************************************************************************************************************** Shipping : Fast and free shipping in the United States! We will ship within 1-2 business days, and our products are stored in a warehouse in Chicago, Illinois. Our products are fully insured from the manufacturer and properly boxed to ensure safe arrival at your home. Warranty&Quality Guarantee : We provide a 1 year warranty for this product, and we have professional technicians in the United States to solve problems and provide technical support for you.We have our own warehouse in Chicago, Illinois, which can guarantee the fastest delivery speed and provide you with the best logistics services. No matter what problems you encounter during purchase or use, our strong after-sales service team will serve you wholeheartedly. Please feel free to contact via eBay messages. Contact us : Please contact us by ebay message if you have any question to ask.All our responses will be sent to your email. If you don't receive a response within 1-2 business days, please check if your email provider uses too strict spam filters to block Ebay's emails, please email us again. We will do our best to make you satisfied, please do not leave a negative feedback before we resolve your problem . Feedback : Your feedback is very important to us it affects our search placement on eBay. We will leave a positive feedback for you in return automatically once we receive your feedback.If you have any questions, please contact us via ebay. We usually respond within 24 hours on weekdays.

Price: 29.99 USD

Location: Chicago, Illinois

End Time: 2023-09-22T05:06:11.000Z

Shipping Cost: 0 USD

Product Images

EPEVER MPPT Solar Charge Controller 10A 20A 30A 40A 12V/24V Auto Max PV 100V

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Inverter Technology: Battery-Based

Model: Tracer-AN

Country/Region of Manufacture: China

Wattage: 130W-1040W

Current Type: DC

System Configuration: Off-Grid

Power Source: Solar

Type: Charger/Inverter

Features: LCD Display, Temperature Control, Wi-Fi Port

Color: Gray

MPN: Tracer-AN Series

Recommended Environment: Indoor/Outdoor

Protection Properties: Discharge Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection, Overload Protection, Overvoltage Protection, Reverse Current Protection, Safety Circuit Protection, Short Circuit Protection, Thermal Protection, Under Voltage Protection

Current Output: 10A/20A/30A/40A

Brand: Epever

Charging Mode: MPPT (Maximum Power Point Tracking)

Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant

Voltage: 12V/24V