IK Multimedia AXE I/O Solo Audio Interface

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer IK Multimedia AXE I/O Solo Audio Interface - Open Box Compact 2-in/3-out audio interface with advanced guitar tone shaping - Open Box - Description Compact Audio Interface with Advanced Guitar Tone Shaping Best-in-Class Guitar Recording Starts Here AXE I/O, IK’s award-winning audio interface, set a new standard for guitar-oriented recording interfaces. Now AXE I/O Solo brings the same great tone shaping, convenient features and premium sound to everyone, everywhere, in a compact and affordable 2-in / 3-out format. AXE I/O Solo combines IK’s two decades of innovation in analog modeling and hardware design to make recording guitar faster, easier and better than ever. Your Guitar’s Golden Channel AXE I/O Solo offers a triple-topology instrument input designed to preserve your guitar’s unique character, combined with powerful tone-shaping features to adapt to any guitar or bass, and helps you coax a wider range of sounds from any instrument. Pick Your Pickup PASSIVE : designed to accommodate everything from low-output vintage pickups to hotter modern humbuckers with ultra-low noise and extended frequency response. ACTIVE : bypasses unnecessary gain stages when using active pick-ups, to keep your signal path as direct, transparent and clean as possible. Choose Your Channel PURE : a completely transparent and ultra-accurate preamp circuit that won’t color your sound in any way. JFET : a Class A JFET input buffer for subtle harmonic enhancement, midrange focus and warmth. AXE I/O Solo also offers IK’s patent pending Z-TONE circuit, letting you dial in impedance from 1 MOhm (“sharp”) down to 2.2 kOhms (“bold”) that interacts with your pick-ups. At the maximum impedance, you’ll find your sound tighter, sharper and more precise. Increase the load and the sound becomes thicker and bolder. You’ll quickly find yourself using these controls to give your guitars even more sonic character – with just a few minutes’ experimentation you can dial in a sound that fits the mix beautifully. Pure Mic Preamp for Transparent Recording AXE I/O Solo offers a high-definition, Class A mic preamp designed for transparent and clean recording. An extended, flat frequency response captures the full tonal range of your voice or instrument without coloring the sound, and best-in-class dynamic range ensures ultra-quiet recordings. Re-Amplification Made Easier Than Ever AXE I/O Solo offers a dedicated Amp Out, a with ground-isolated design and zero-latency routing, letting you ditch expensive and confusing reamping setups. It’s simple : connect the Amp Out to your amp, then mic it up using AXE I/O Solo’s microphone preamp. Now you can capture a clean copy of your signal while recording and feed it back to your amp afterwards to experiment with different amp, stompbox and microphone settings without re-recording countless takes. A Truly High-End Audio Interface for Everybody The original AXE I/O set a high bar for sound quality. AXE I/O Solo preserves the best-in-class dynamic range, ultra-low self noise and wide, extended frequency response essential to capturing the most accurate details of your performance, and for keeping your sound completely pure and transparent. AXE I/O Solo offers separate master & headphone volume and a Monitor knob to blend direct signals and the audio from your computer for zero latency monitoring. 24-bit, 192 kHz conversion and an ultra-stable, low jitter internal clock ensures the highest fidelity, delivering truly professional-grade recordings for everyone. Advanced Digital Control & Routing AXE I/O Solo also includes a powerful, convenient Control Panel application to manage inputs & outputs and assign routing & controller inputs. In the INTERFACE tab, you can view the active inputs, enable phantom power and control the ground lift to dial in the least noise for your setup. Adjust output volume, direct monitoring routing, select the sample rate and more. The CONTROLLER tab gives you control over the 2 controller inputs. Set behavior, MIDI channel, MIDI CC #, minimum and maximum values, and more, to dial in the best settings for any application you want to control. The AXE I/O Solo Control Panel lets you keep focused on your work, instead of adjusting settings on the unit itself, for a faster, freer workflow. A Full-Blown Analog in-The-Box Studio – Out of The Box AXE I/O Solo offers a massive bundle of software and plug-ins to unleash your creativity. The included AmpliTube 4 Deluxe offers over 140 ultra-accurate models of guitar and bass amps, cabs, pedals, mics and more. 10 of our best sounding T-RackS 5 processors cover the most popular gear for mixing and mastering full tracks. And Ableton Live 10 Lite gives you a fresh and easy way to write music, record audio and produce your own songs. Features/Specs 2-in / 3-out USB audio interfaceACTIVE/PASSIVE pick-up selectorPURE and JFET input stagesZ-Tone impedance-adapting circuitAmp Out with ground loop interrupterHigh-resolution, Class A mic preamp24-bit, 192 kHz sound qualityWide frequency response ideal for instrumentsBest-in-class analog/digital conversionUltra-low noise floor for high-gain recording CommonAD and DA Resolution : 24-bitSampling Rate : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHzHost Connection : USB Type-B receptacle. USB 2.0 (High Speed).Line Outputs 1-2 (Monitor)Configuration : Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot.Output impedance : 150 Ohms balanced, 75 Ohms unbalancedOutput Level : 0 dBFS corresponds to +13.5 dBuFrequency response : From 1 Hz to 46 kHz within 0.5 dB (96 kHz sample rate)Dynamic Range : 113 dB(A)THD @ -1 dBFS : 0.001%THD+N : -103 dB(A) at -1 dBFSChannels 1-2 crosstalk : 112 dB(A) Output 3 (Amp output)Configuration : Unbalanced, floating, with selectable ground liftOutput impedance : 75 OhmsOutput Level : 0 dBFS corresponds to -3 dBuFrequency response : From 20 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)Dynamic Range : 106 dB(A)THD+N : -93 dB(A) Headphones OutOutput impedance : Virtually ideal source (zero Ohms) until clippingMaximum Output level : +9 dBu into 50 Ohms load (approx 95 mW)Frequency response : From 1 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)Dynamic Range : 111 dB(A)THD+N : -102 dB(A) Instrument InputConfiguration : Multiple topology instrument preampInput impedance, PASSIVE mode : Variable from 1 MOhms down to 2.2 kOhmsInput impedance, ACTIVE mode : 10 kOhmsInput level, min gain : 0 dBFS is obtained with a +12.5dBu signal at the TS inputInput level, max gain : 0 dBFS is obtained with a -19 dBu signal at the TS inputFrequency response : From 6 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)Dynamic Range : 117 dB(A)THD, PURE mode : 0.002 % (-1dBFS input)THD, JFET mode : 0.5 % Mic InputConfiguration : Class-A discrete differential microphone preamp, pin 2 hotInput impedance : 4 kOhms differentialInput level, min gain : 0 dBFS is obtained with a +9 dBu signal at the XLR inputInput level, max gain : 0 dBFS is obtained with a -44 dBu signal at the XLR inputFrequency response : From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)Dynamic Range : 116 dB(A)THD+N : -104 dB(A) at -10 dBFS Line InputConfiguration : Class-A discrete differential line receiver, tip hotInput impedance : 20 kOhms differentialInput level, min gain : 0 dBFS is obtained with a +26 dBu signal at the TRS inputInput level, max gain : 0 dBFS is obtained with a -27 dBu signal at the TRS inputFrequency response : From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)Dynamic Range : 117 dB(A)THD+N : -104 dB(A) at -10 dBFS Connections and Controls Front PanelOne 1/4" instrument input jacksTwo analog potentiometers for Input GAINTwo 5 segments input level meter (peak)Analog potentiometers for Z-Tone controlPick-Up selector (PASSIVE/ACTIVE)Preamp topology selector (JFET/PURE)+48V phantom power switchUSB LEDSMIDI IN/OUT LEDsMonitor knob1/4" headphones output jackMaster potentiometer for main output control1/4" Amp output jack Rear PanelMIDI I/O 5-pin DIN connectorsB-Type USB socket for connecting a computer (Mac/PC)2 x 1/4" TRS External controllers sockets2 x 1/4" TRS Balanced floating line outputs1 Combo socket for MIC input and Line input (auto selecting) DimensionsSize : 19.5cm x 19.5cm x 5.3cm Compatibility Computers64-bit application. Requires a 64 bit CPU and Operating System. Mac (64-bits)Minimal : macOS 10.11 or later. One free USB port. Windows (64-bits)Minimal : Windows 7 or later. One free USB port. We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 219.99 USD

Location: Winchester, Virginia

End Time: 2024-11-28T18:21:05.000Z

Shipping Cost: 0 USD