Model of the Carl Goldberg Shoestring Stunter Short Kit With Full Size Plans NEW

Description: Normal 0 false false false EN-US X-NONE X-NONE PLEASE NOTE: This is a Partial Short Kit with a copy of the Original Full Size Plans Short Kit and Full Size Printed Plans for the Carl Goldberg Original Shoestring Stunter Vintage Control Line Stunt Model Plane I borrowed an unmolested original kit and spent enumerable hours duplicating all the original unique parts until I had an exact duplicate of the original kit. I redrew each part in CAD and successfully cut the parts using the laser machine. This listing is for a SHORT KIT which contains all the unique parts that are required to build the C.G. ORIGINAL SHOESTRING STUNTER and a full set of Full Size Printed Plans. You will need to supply the rest of the standard parts to complete the model. Although it is an easy enough control line plane to build this kit is not recommended for the beginner. You should have a solid scratch build skill level and some model airplane fabrication experience. Each kit is cut as ordered and is considered a ‘custom product. Most of the balsa parts are cut with a laser. The one-piece fuselage is machined on a CNC router. It may be made from several sheets glued together prior to machining. Model of the Original Carl Goldberg Shoestring Stunter Profile Control Line Model Airplane Short Kit Contains ONLY the following items: 1 CNC Machined One-piece ½” Balsa Fuselage18 Laser Cut 3/32” Balsa Wing Ribs6 Laser Cut 3/32” Balsa Wing Tip Supports6 Laser Cut 1/8” Wing Tip Pieces1 Laser Cut 1/8” Balsa Stabilizer 2 Laser Cut 1/8” Balsa Elevators1 Laser Cut 1/8” Balsa Rudder 1 Laser Cut 1/8” Balsa Dorsal Fin6 Laser Cut 1/4” Balsa Scoop Parts8 Laser Cut 1/16” Balsa Center Wing Sheeting Parts (top and bottom)2 Laser Cut 1/8” Plywood Fuselage Doublers2 Laser Cut 1/8” Plywood Center Wing Reinforcements1 Laser Cut 1/8” Plywood Bell Crank Platform1 Laser Cut 1/8” Elevator Reinforcement 1 Laser Cut 1/8” Elevator Horn4 Laser Cut 1/8” Misc Parts 36”x48” Full Size Redrawn Printed PlansCopies of the original Assembly diagram and build notes. According to the Original Kit from decades ago, you may also need some or all the following items to complete the model (not included in the short kit) that most of us scratch builders have on hand…. Approximately 28” x 1” of nylon webbing / ribbon Two ¼” round dowels 1-3/4” in length Four ¼” x 5/16” x 18” stick balsa spar Two 3/8” x ½” x 3-5/8” hard wood motor mounts Two 1” leading edge at 17-3/4” in length Two 3/8” x 1” trailing edge material at 17-3/4” in length 1/8” piano wire for landing gear at least 16” in length 1/16” wire 6-3/8” in length 5/64” wire at 17-1/4” in length.19 to .40 engineMisc mounting bolts and nutsPropellerSpinnerTank and tank strapFuel line2” wheels3” BellcrankFlexible cable leadouts3/32” O.D. leadout tubing2 line connectorsSolder lug#4 washers1/8” x 2” rubber bandsGlue/CA/EpoxyWing weightCopper wireSolderSandpaperPinsFinishing materialControl handleFlying lines1/8” wheel collars or eyeletsPlus whatever else you wish to use. Any complete model plane in the pictures are for illustration purposes only and is NOT included. Don’t expect more than what is described above. Only the unique parts and paper plans with build notes are are being offered in this listing regardless of what is shown. The other parts shown in the pictures are for illustrative purposes only and are not included. Please ask any questions before purchasing. Although I have listed 15 days handling time, I usually cut and ship much faster. The extended time is in case I run out of material. BECAUSE THESE ARE CUSTOM MADE TO ORDER - I DO NOT ACCEPT RETURNS ON THIS ITEM. VintagePlaneKits

Price: 120 USD

Location: Visalia, California

End Time: 2024-02-24T23:58:27.000Z

Shipping Cost: 15 USD