Description: Genuine Williams/Bally Replacement Part By Permission of Planetary Pinball Supply, Inc New Software released October 12 2021 Theatre of Magic 2.0 This is the chip containing the CPU game code for the THEATRE OF MAGIC pinball.It is the latest version 2.0 available from Bally Williams . Please read below to see the improvements this offers. The chip will be ready to plug and play and will come with an installed official Bally/Williams sticker. **INCLUDED in the shipping package is a card with the LINK for the REMOVAL & INSTALLATION INSTRUCTIONS**Purchaser must read and agree to the license agreement located below. Note: if you are currently getting a checksum error message on the display you should replace the CPU chip with a new one of these. Theatre Of MagicRevision 2.05 October 2021Game softwareU6:Theatre Of Magic U6 game ROM rev 20.romSHA1: 8BC03F4412F2986FC0816F25F40AC9B16200DE07CreditsChanges designed and implemented by Soren Worre.Based on the revision 1.3X software released in 1995 by Williams Electronics Games Inc.The author would like to thank the designers of this pinball machine.Special thanks to Ian Hawkesworth, Lars Kuemmerling and Steve Bowden.SummaryA defect in the Trunk control that could cause it to stop working midgame is fixed.Four new feature adjustments to aid fine tuning score balancing and mode difficulty.Strategic Basement awards in competition play.In competition play, the multiball is not started as compensation during ball search.The revision 1.4H Tiger saw motor control is ported to this revision.The display omits buy-in high scores when buy-in disabled.ImprovementsBetter mechanical device stabillity for location as well as competition usage.Better applicability in competition usage in all levels.Minor bug fixes.Detailed changes descriptionReference to the revision 1.3X.The Trunk error handling procedure has been refined to not give a false positive during normal playing conditions with a healthy Trunk mech.With secondary function to reset the error state in case of genuine in-game Trunk error (like with a stock ball).When tournament play selected: Opening/closing the coin door will reset the Trunk error state.New feature adjustment A.2 21 "Spell theatre". Options: "Easy" and "Hard".Easy: As rev. 1.3X. Spell theatre is lit except in the modes: Theatre, Lock multiball and Grand finale.Hard: On THEATRE advance, the Spell theatre light will go off. Making a major shot in the game will re-light it.Major shots considered: Trunk loop both ways, Trunk, both ramps and the right orbit. Not the left orbit nor the Tiger saw captive ball.Adjustment "Spell theatre" defaults.Ex. easy, easy and medium pre-sets: Easy.Hard and ex. hard pre-sets: Hard.New feature adjustment A.2 22 "Combo max value". Options: 8M - 80M in 4M steps. Default: "20M".On combo value build-up, when it reaches this value, it will stop incrementing.Combo scoring will proceed at this value.New feature adjustment A.2 23 "Bonus-x adv". Options: "1" and "2". Default: "1".Bonus-x increment for each top lane completion. 1 or 2. With 2 being 1x->2x on first completion.New feature adjustment A.2 24 "Hocus 2nd saver". Options: "No" and "Yes". Default: "Yes".In single ball play only!If the Hocus pocus outlane saver magnet fails, a compensation one shot ball saver will serve the ball to the plunger lane.The feature only saves balls going to an outlane, that should have been saved to an inlane.When tournament play selected: Basement awards.A catch-up choice that will award progress on Illusions or Clock. Which ever is lacking behind the other.Generally:If the clock is 10 or 11 am, Madness is awarded.If the clock progress is less than the Illusions progress, Adv. clock is awarded.Else Illusion is awarded.Special cases:Illusion is not awarded if achieved for this Grand finale, if already lit, if one is currently running or when other states where an Illusion cannot be started at the Trunk.Adv. clock/Madness is not awarded if achieved for this Grand finale.If Illusion is not available, Adv. Clock is awarded if not achieved for this Grand finale.If neither is available, 20 Million is awarded.When tournament play selected: Limited ball search. No compensation locked balls release or free multiball.The Tiger saw motor control has been ported from the rev. 1.4H software. And slightly improved.It runs for a solid two seconds on a captive ball hit. Instead of the very short pulse in the rev. 1.4H implementation.In a Tiger saw mode and multiball stack, it stops when both modes are finished. And not when just the first of them finishes.Tiger saw motor added to the solenoid test.Feature adjustment A.2 12 "Trunk ball save" now has three options."No": Trunk ball saver is disabled. This is default."Yes": Rev 1.2 behaviour. Trunk ball saver is enabled for more Trunk hits."Once": Rev 1.3X behaviour. Trunk ball saver is enabled for the first hit to the Trunk only.The buy-in high scores are removed from attract mode DMD presentation and status report, when the buy-in feature is disabled.The max bonus-x 5M is awarding 5M points.Midnight is corrected to be at 12 AM. Not 12 PM.Adjustment A.1 28 "Min. vol override" defaults to "Yes".Adjustment A.1 21 "Language" is limited to to "English".NoteThe false positive Trunk error trap was to start choiced Illusions by hitting the Trunk while rotating. Just before it reaches the open position.The fix does not change the way the Trunk operates. Registering shots, the movement, timing etc.Coin door error reset is designed for competition play, where a stock ball has caused the Trunk error.Provided that the bottom coin door interlock switch is not fixed in the closed position.Upon closing the coin door, allow a ball search to reset the Trunk to its correct position.Spell theatre is always lit at start-of-ball.Spell theatre is always lit when Theatre mode, Lock multiball and Grand finale finishes.The Hocus pocus saver compensation works when the saver mechanism is broken (proximity switch or magnet).But, requires inlane, outlane, trough and shooter lane switches to be in shape.The Advance clock Basement award is +3.The Tiger saw motor runs continuously in the Tiger saw mode and multiball.And it is pulsed on a captive ball hit.The motor is controlled by solenoid driver no. 19 (at J125-3 or J126-3).Do not connect a motor directly. It must be connected via the proper EMI filter.The Trunk ball saver is generally only active in non-mode play and with the Trunk at its passive position.Max bonus-x is 8. WILLIAMS ELECTRONICS GAMES, INC. SOFTWARE LICENSE PLEASE READ THIS LICENSE CAREFULLY.1. License. The software installed through this process (the "Software") and any related documentation provided to you are licensed to you by Williams Electronics Games, Inc. or its affiliates ("Williams"), subject to the terms and conditions in this License Agreement. Williams retains title to the Software and related documentation. This license allows you to use the Software only in the specific pinball games manufactured by Williams and marketed under the WILLIAMS or BALLY trademark for which the Software is intended ("Pinball Games"). To do this, you are permitted to transfer the Software into a Flash ROM device in the Pinball Game. Other than the copy of the Software installed for you during this process, one (1) archival copy thereof, and the Flash ROM copies for installation into the Pinball Games, you may make no copies of the Software. You may not transfer or sublicense your license rights in the Software to another party or distribute copies of the Software, except that you may install Flash ROM copies of the Software into Pinball Games owned by others as part of servicing such Pinball Games, provided the owners of the Pinball Games read and agree to accept the terms and conditions of this License Agreement and provided you do not charge an additional fee for the provision of the Flash ROM copy of the Software. Under no circumstances may you sell copies of the Software, including Flash ROM copies. You may not publish the Software. 2. Restrictions. The Software contains copyrighted material, trade secrets and other proprietary material. You may not decompile, reverse engineer, disassemble or otherwise reduce the Software to a human-perceivable form. You may not modify, network, rent, lease, loan, or create derivative works based upon the Software in whole or in part. You may not electronically transmit the Software from one computer to another over a network. 3. Termination. This License Agreement is effective until terminated. You may terminate this License Agreement at any time by destroying the Software, related documentation and all copies thereof. This License Agreement will terminate immediately without notice from Williams if you fail to comply with any provision of this License Agreement. Termination of this License Agreement terminates the license granted hereunder. Accordingly, upon termination of this License Agreement you must destroy the Software, related documentation and all copies thereof in your possession or under your control. 4. Export Law Assurances. You agree and certify that neither the Software nor any other technical data received from Williams, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by you outside of the United States, you agree that you will not re-export the Software nor any other technical data received from Williams, nor the direct product thereof, except as permitted by the laws and regulations of the of the United States and the laws and regulations of the jurisdiction in which you obtained the Software. 5. Government End Users. If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. The Government agrees: (i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as "Commercial Computer Software" and the Government is acquiring only "restricted rights" in the Software and its documentation as that term is defined in Clause 252.227-7013(c)(1) of the DFARS; and (ii) if the Software is supplied to any unit or agency of the United States Government other than DoD, the Government's rights in the Software and its documentation will be as defined in Clause 52.277-19(c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-896(d) of the NASA Supplement to the FAR. 6. Disclaimer of Warranty on Software. You expressly acknowledge and agree that use of the Software is at your sole risk. The Software and related documentation are provided "AS IS" and without warranty of any kind and Williams EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. WILLIAMS DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE, WILLIAMS DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY WILLIAMS OR A WILLIAMS AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT WILLIAMS OR A WILLIAMS AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. 7. Limitation of Liability. UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL WILLIAMS BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF WILLIAMS OR A WILLIAMS AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 8. Controlling Law and Severability. This License Agreement shall be governed by and construed in accordance with the laws of the United States and the State of Illinois, as applied to agreements entered into and to be performed entirely within Illinois between Illinois residents. If for any reason a court of competent jurisdiction finds any provision of this License Agreement, or a portion thereof, to be unenforceable, that provision of the License Agreement shall be enforced to the maximum extent permissible so as to effect the intent of the parties, and the remainder of this License Agreement shall continue in full force and effect. 9. Complete Agreement. This License Agreement constitutes the entire agreement between the parties with respect to the use of the Software and the related documentation and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No amendment to or modification of this License Agreement will be binding unless in writing and signed by a duly authorized representative of Williams. Please be sure to visit my eBay store for lots of hard to find pinball parts!! We supply ALL the ROMS & EPROMS for your pinball machines.If you don’t see your particular game listed, contact me. I also carry pinball security chips, 5101, 6116, 6264, 6800, 6810, 6821, 6502, 6532, and many more hard to find I.C.’s for old pinball machines. NO matter what the shipping calculator says, I will combine shipping. Up to 8 chips will ship for the price of one auction.
Price: 12.95 USD
Location: Collingwood, Ontario
End Time: 2024-10-12T13:35:23.000Z
Shipping Cost: 9 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Bally
