Saginaw Power Steering Pump Chrome Keyway Style For Chevy GM Chrysler P Series

Description: CPO Condition 100% Brand New Color As the picture Includes 1x Power Steering Pump. DETAILS & SPECIFICATIONS Features 100% quality assurance tested, more responsive, less expensive, and easier to install. Desirable early style "Type 1" pump with threaded and keyed shaft for easy pulley installation. The pump Pressure is 1200-1450 PSI with a 1.3-3.2 GPM Flow Rate. Have a 0.3" hose barb for the return line, a female M16*1.5 inverted flare fitting and 3/8 " mounting holes. Precise and smooth steering, get the maximum out of your steering system. Fitment Fit most GM 66-74 Saginaw 5/8" Keyed Shaft Style. For 70-74 Chevrolet Monte Carlo V8 5.7L / 6.6L / 7.4L.For 74 Chevrolet Camaro V8 5.7L.For 73 Chevrolet Camaro V8 5.0L / 5.7L.For 70-72 Chevrolet Camaro V8 5.0L / 5.7L / 6.6L.For 70 Chevrolet El Camino V8 6.5L.For 70-73 Chevrolet El Camino V8 5.0L.For 70-74 Chevrolet El Camino V8 5.7L / 6.6L / 7.4L.For 74 Chevrolet Malibu V8 5.0L.For 73-74 Chevrolet Malibu V8 5.7L / 6.6L / 7.4L.For 70 Chevrolet Chevelle V8 6.5L.For 70-73 Chevrolet Chevelle V8 5.0L / 5.7L / 6.6L / 7.4L.For 66-68, 70-72 Chevrolet Bel Air.For 66-68, 70-72 Chevrolet Biscayne.For 70-72 Chevrolet Brookwood.For 67-69 Chevrolet Camaro.For 66-72 Chevrolet Caprice.For 66-68 Chevrolet Chevelle.For 66-67 Chevrolet El Camino.For 66-72 Chevrolet Impala.For 69-71 Chevrolet Kingswood.For 69-74 Chevrolet Nova.For 69-71 Chevrolet Townsman.For 73-74 Chevrolet Vega. INSTALLATION Begin by removing the power steering belt and disconnecting the pressure and returning hoses from the pump. The fluid will drain out of the pump and lines, so have a waste oil container available Remove all bolts that retain the pump and its mount brackets to the engine. Remove the pump assembly from the vehicle. Using a power steering pump pulley remover, remove the pulley from the pump. Remove the mounting bracket from the pump. Install the pump mount bracket onto the new pump. Install the pump pulley onto the pump. Attach the arm by removing the lower bolt and installing the arm. Add washers as needed to keep the arms straight with the pump face. Tighten up all bolts and install the belt. Adjust for tension. Check that all bolts are tight and the pump is properly aligned. Line from hose barb to low-pressure port, then line from SAE inverted flare to high pressure. Add fluid into the inlet port, then start the vehicle, and test the steering power. NOTE Provide a tracking number with every order, please buy with confidence! Please allow differences due to manual measurement. No installation guides are included, we highly recommend seeking professional installation. The color of the actual items may be slightly different from the listing images due to different computer screens. For any inquiries, please write to us.

Price: 101.9 USD

Location: Rancho Cucamonga, California

End Time: 2025-02-07T01:10:22.000Z

Shipping Cost: 0 USD