WOOLWAX Auto/Truck Lanolin Undercoating 5 Gallon Pail. STRAW (clear)

Description: Very fast same day free shipping (weekdays). Order now and you will have a tracking # soon.Woolwax™ does not dry. When applied Woolwax™ will create a wet film-like barrier that moisture and oxygen cannot penetrate. Without moisture and oxygen there can be no oxidation. because Woolwax™ is non-drying, it is always active and migrating into the inaccessible areas o f the doors, seams and folds of the sheet metal, and all the other difficult to reach areas. Woolwax™ is very thick and will not wash off easily. An application every couple of years will easily protect your vehicle through the snow/ice/salt season. In the enclosed areas, (doors, frame rails, rockers, etc.) the Woolwax® will provide protection indefinitely (years). It is only the exposed areas of the undercarriage that should be coated annually with Woolwax™. Woolwax™ is formulated to be thicker and provide protection longer than any other lanolin based undercoating product.Woolwax™ will not wash off like low viscosity competitors.Woolwax™ has almost no smell ! Easily applied using any of the undercoating guns from Kellsport Products. WOOLWAX™ is a lanolin based auto / truck undercoating made from raw WOOLWAX®. WOOLWAX™ sprays on wet and does not dry out. WOOLWAX™ creates a thin lanolin film barrier to keep moisture and oxygen away from the base metal. * Solvent free. Environmentally friendly. * Always active and creeping into inaccessible areas. * WOOLWAX™ will thicken to a gel film after applied and is very resistant to wash off. * Provides vehicle undercarriage protection for a full season. * Enclosed areas (doors, frame-rails, rocker-panels, etc., that are not exposed to road-wash will be protected indefinitely (years). This is the advantage of no solvents. There is nothing to dry up and evaporate. WOOLWAX™ is a non-drip formula. We make it to be as thick as possible to resist wash-off, yet still easily sprayable.WOOLWAX™ can be applied with most undercoating guns using a pressure of 70-90 psi. Use WOOLWAX™ both on the undercarriage and in the enclosed areas (frame rails, rockers, etc.) Is it better to use a thinner version in the frame, doors etc. ? There is a misconception that thinner is better in the cavities. And we have thinner formulas, so it's not about "the sale". Some people tell us that they use the Woolwax™ for the undercarriage and some thinner brand for the cavities because they think it creeps better. That’s just not accurate. The traditional Woolwax™ creeps and migrates just as well, and leaves a thicker coating than a thinner formula. It may take us a bit longer to get there, but Woolwax™ will travel to all the same nooks and crannies and leave a much thicker surface build on the way. On enclosed areas surface build is everything. Thin formulas will creep and the surface build gets thinner and thinner all along the way until the coating is so thin, there is almost no surface build to provide protection.Bottom line.... original thick Woolwax™ (or any viscous coating) will provide better protection for enclosed areas (frame rails, etc.) than thin formulas that leave a very fine surface build.If for some reason you really want to thin out Woolwax™ for the inner cavities, all you need to do is add a bit of vegetable oil (Wesson, Mazzola, etc.) to the Woolwax™. Vegetable oil is very compatible with lanolin. 1/3 vegetable oil to 2/3 Woolwax™. The Woolwax™ quart bottles are 6”, so just fill the top 2” with vegetable oil.Very proudly Made in U.S.A. Very Proudly manufactured in U.S.A.

Price: 239 USD

Location: Fall River, Massachusetts

End Time: 2024-04-18T03:31:43.000Z

Shipping Cost: 0 USD